InFocus SP-CEIL-010 installation instructions Wall Mount Installation

Wall Mount Installation

Complete the following steps to install the projector mount and projector to your wall. (FIGURE 4)

Note: Look at the bottom of the upper assembly (D) and locate the arrow. Make sure you install the projector mount with the arrow pointing toward your screen.

NOTE: Follow step 3 to secure the extension to the mount assembly.

15.Secure the upper plate to the wall using the commercially available hardware (E) suitable for your environment. Be sure that the screen indicator arrow is pointing toward your screen.

16.Carefully raise the projector (C) with the mounting bracket (B) attached and insert it into the bottom of the mount assembly by its tabs.

17.Rotate the projector (C) with the mounting bracket (B) attached 180º so that the projector’s focus rings is pointing toward your screen.

18.Align the safety knob on the mount assembly with the end of the arrow-shaped slot on the mounting bracket (B) and screw it through the opening to prevent further rotation. Hand-tighten the securing knob.

19.Hand-tighten the remaining two tension knobs to secure the mounting bracket (B) to the mount assembly (D).

CAUTION: Check all of the hardware for proper tightness and security. Do not over-tighten the screws.

SEE FIGURE 4

NOTE: Use the Allen wrench key (F) for the following modification

Wall wood stud

D

Wall structure

Adjustable extension

E

Adjustable screws

	B
WARNING
When using the optional
extension adapters and making
a height adjustment while
secured to the wall or ceiling do
not remove the screws	C
completely from the extension.
Failure to do so could result in
injury and damage to the
projector.	B

A

C

5