InFocus X1 manual Component video connection, VGA connection

Component video connection

If your video device has component connectors, use the component to S-video adapter. Plug the component cable into the video device. Plug the other end of the component cable into the adapter and plug the adapter into the projector’s S-videoconnector. Use the audio adapter as described on the previous page.

Component connection offer the highest quality video output.

connect component cables via component to S-video adapter and audio cables via audio adapter

VGA connection

If your video device has a 15-pin VGA output, plug one end of the included computer cable to the VGA connector on your video source. This connector may be labeled “To Monitor” on the video source. Plug the other end of the cable into the Computer In connector on the projector.

Use the audio adapter as described on the previous page.

connect VGA cable and audio cable via audio adapter

Connect the power cord to the Power connector on the side of the projector	connect power cable
and to your electrical outlet.
NOTE: Always use the power cord that shipped with the projector.

14