Usage Notice
Precautions
Follow all warnings, precautions and maintenance as recom- mended in this user’s guide to maximize the life of your unit.
Warning- Do not look into the projector’s lens when the lamp is on. The bright light may hurt your eyes.
Warning- To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
Warning- Please do not open or disassemble the product as this may cause electric shock.
Warning- When changing the lamp, please allow unit to cool down, and follow all changing instructions.
Warning- Hg – Lamp contains mercury. Manage in accordance with local disposal laws. See
www.lamprecycle.org.
Warning- This product will detect the life of the lamp itself. Please be sure to change the lamp when it shows warning mes- sages.
Warning- Reset the “Lamp Reset” function from the On Screen Display “Default Setting” menu after replacing a new lamp module (refer to page 25).
Warning- When the lamp reaches the end of its life, it will burn out and may make a loud popping sound. If this hap- pens, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the procedures listed under “Replacing the Lamp”.
Caution- When switching the projector off, please ensure the projector completes its cooling cycle before disconnect- ing power.
Caution- Turn on the projector first and then the signal sources.
Caution- Do not use lens cap when projector is in operation.
