Ingersoll-Rand 650542-1 general information manual Read This Manual Carefully Before Installing

OPERATOR’S MANUAL			650542-X
			650543-X
INCLUDING: OPERATION, INSTALLATION AND MAINTENANCE.
INCLUDE MANUALS: 6712X-X Pump (pn 97999-602), 651615-X-D Single Post Lift / Ram (pn			RELEASED: 3-6-95
97999-1025) & S-636 General Information (pn 97999-636).
			REVISED: 3-17-08
	650542-X	650543-1
4-1/4” AIR MOTOR			(REV. H)
43.6:1 RATIO	Carbon Steel	Stainless Steel
4” STROKE	Pump System

READ THIS MANUAL CAREFULLY BEFORE INSTALLING,

OPERATING OR SERVICING THIS EQUIPMENT.

It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.

SERVICE KITS

Use only genuine ARO® replacement parts to assure compat- ible pressure rating and longest service life.

61268 for repair of 65440 air motor section.

104158 for repair of 127112-000 regulator.

104176 for repair of F25241-100 filter.

104177 for repair of R27241-100 regulator

116772 for repair of E512LM valve.

637290-P43for repair of 67100-P43 lower pump section. 637291-P43for repair of 67101-P43 lower pump section.

GENERAL DESCRIPTION

WARNING DO NOT EXCEED MAXIMUM OPERATING PRESSURE OF 6,549 P.S.I. (451.7 BAR) AT 150 P.S.I. (10.3

BAR) AIR INLET PRESSURE.

WARNING REFER TO GENERAL INFORMATION MANUAL INCLUDED FOR OPERATING AND SAFETY PRECAU- TIONS AND OTHER IMPORTANT INFORMATION.

By delivering a smooth, continuous bead of the proper size, an ARO system helps the operator maintain both production rate and produce high quality standards. Maintained quality standards assures that the material benefits are realized. To further maximize operator production time, the ARO sys- tem has a built-in lift / ram feature for quick and easy drum changeover and easy lifting of the pump assembly from the container.

ARO systems are totally enclosed, sealing the material in the system from air and moisture, preventing premature cure- out of the material. This allows for either continuous or in- termittent use of the system and reduces the need for daily system clean-up.

The 43.6:1 ratio is an expression of the relationship between the effective air motor area and the effective lower pump area. When 150 p.s.i. (10.3 bar) of air pressure is supplied to the air motor, the lower pump area will develop a maximum of 6,549 p.s.i. (451.7 bar) of fluid pressure (at no flow). As the fluid control is opened, the flow rate will increase as the air motor cycle rate increases to keep up with the demand.

y ARO® is a registered trademark of Ingersoll-Rand Company y

INGERSOLL RAND COMPANY LTD

P.O. BOX 151 y ONE ARO CENTER y BRYAN, OHIO 43506-0151

(800) 276-4658 y FAX (800) 266-7016	© 2008	CCN 99652174
fluids.ingersollrand.com

3

1

2

Figure 1

MAJOR COMPONENTS

Item	Description (size)	Qty	Part No.
1	Single Post Ram Assembly	(1)	651615-D
2	Follower Plate (model 650542-1)	(1)	651840-1
	(model 650542-2)	(1)	651840-2
	(model 650543-1)	(1)	651841-1
3	Basic Pump Assembly (model 650542-X)	(1)	67120-P43
	(model 650543-1)	(1)	67121-P43
	Portability Kit (optional) (not shown)		66713