Ingersoll-Rand 650935-X43-C specifications 2.062 SQ.” HYDRAULIC MOTOR, Ratio, 6” STROKE

OPERATOR’S MANUAL		650935-X-C
INCLUDING: SPECIFICATIONS, SERVICE KITS, GENERAL INFORMATION, TROUBLESHOOTING.		RELEASED: 9-29-00
INCLUDE MANUALS: 66266-X-B Lower Pump End (pn 97999-829), 67147-B Hydraulic Motor (pn 97999-1219) &		REVISED: 11-10-06
S-632 General Information Manual (pn 97999-624)	650935-X43-C	(REV. C)
2.062 SQ.” HYDRAULIC MOTOR
	CHOP-CHECK PUMP SERIES
3.6:1 RATIO
6” STROKE	CARBON STEEL

READ THIS MANUAL CAREFULLY BEFORE INSTALLING,

OPERATING OR SERVICING THIS EQUIPMENT.

It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.

SERVICE KITS

•Use only genuine AROR replacement parts to assure compatible pressure rating and longest service life.

•637449 for repair of hydraulic motor section.

•637074-X43-B for repair of lower pump section. Refer to the chart on page 2 for description of -XXX options.

SPECIFICATIONS

Model Series (refer to option chart) . .	. . . . . . 650935-X43-C
Type	Hydraulically Operated, Chop-Check
Ratio	. . . . . . 3.6:1
Hydraulic Motor	. . . . . . 67147-B
Motor Repair Kit	. . . . . . 637449
Motor Size	. . . . . . 2.062 sq." (13.3 sq. cm)
Stroke	. . . . . . 6" (15.2 cm)
Hydraulic Inlet (female) . . . .	. . . . . . 3/8 - 18 N.P.T.F. - 2
Hydraulic Return (female) . .	. . . . . . 1/2 - 14 N.P.T.F. - 2
Lower Pump End Series . . . .	. . . . . . 66266-X43-B
Lower Pump Repair Kit . . .	. . . . . . 637074-X43-B
Material Inlet	. . . . . . N/A
Material Outlet (female) . . .	. . . . . . 1 - 11-1/2 N.P.T.F. - 1
Weight	. . . . . . 62.1 lbs (28.2 kgs)

PERFORMANCE

Hydraulic Inlet Pressure Range	. . . 50 - 1200 p.s.i. (3.4 - 83 bar)
Fluid Pressure Range	180 - 4320 p.s.i. (12.4 - 297.9 bar)
Required H-power @ 50 c.p.m. .	. . . . . 3.2 @ 1200 (83 bar)

Hydraulic flow required @ 50 c.p.m. . 4.9 g.p.m. (18.5 l.p.m.)

Maximum rec’d Cycles / Minute	50
Displacement In3 Per Cycle	6.959
Volume / Cycle	3.9 oz. (114 ml)
Cycles Per Gallon	33.2
Flow @ 50 Cycles / Minute	1.5 g.p.m. (5.7 l.p.m.)
Noise Level	N/A
Maximum Temperature Limit	130_ F (54_ C)

PUMP DATA

MODEL 650935-X43-C

	Hydraulic Inlet (not shown)
	3/8 - 18 N.P.T.F. - 2 (female)
	Hydraulic Outlet (female)
	1/2 - 14 N.P.T.F. - 2
	Hydraulic Motor 67147-B
	(see manual 67147-B)
47-15/32"
(1206 mm)	Spacer Section
	Screw 93342-1 (3)
	Washer Y79-625 (3)
33-3/32"	Connector (see Figure 2)

(841 mm)

Spacer Rod 93345-1 (3)

Material Outlet (female)

1 -11-1/2 N.P.T.F. - 1

90_ from hydraulic inlet

17-3/4"

(450 mm)

Lower Pump 66266-X43-B

(see manual 66266-X-B)

3-15/32"

(88 mm)

Figure 1

Accessories available: 61937-1 wall bracket and 65138 floor mounting flange.

IMPORTANT

This is one of the four documents which support the pump. Re- placement copies of these forms are available upon request.

=650935-X-C Model Operator’s Manual (pn 97999-836)

-S-632 General Information - Industrial Piston Pumps (pn 97999-624)

-66266-X-B Lower Pump End Operator’s Manual (pn 97999-829)

-67147-B Hydraulic Motor Operator’s Manual (pn 97999-1219)

INGERSOLL RAND COMPANY LTD

P.O. BOX 151 D ONE ARO CENTER D BRYAN, OHIO 43506-0151

& (800) 276-4658 D FAX (800) 266-7016 E2006 CCN 99778888