651616-XPAGE 2 OF 8
OPERATING AND SAFETY PRECAUTIONS
ZReadand heed all Warnings, Cautions and Safety Precautions
before operating.
ZUseonly genuine ARO replacement parts to assure compatible
pressure rating and longest service life.
WARNING ANCHORTHE LIFT BASE SECURELYTO A CON-
CRETEFLOOR. An improperly secured lift could be unsafe. Do
notattempt to use the lift until all possible measures have been
takento insure that the lift has been properly installed and the
basehas been secured. It is the duty of the installer to provide an-
chor bolts / studs (not included) and for them to be securely em-
bedded in concrete which is more than 2’’ thick.
Shock hazard.
Striking electrical
fixtures can cause
injury.
Keep the area
overhead clear of
electrical devices.
WARNING PREVENTELECTRICSHOCK. Be certain the area
abovethe lift is clear of electrical fixtures, devices and wiring.
Examinethe working area and take necessary action to assure ade-
quateclearance for the lift and pump assembly to raise to the fullest
limit and function properly.
Keep hands clear
when aligning with
container.
Pinch hazard.
Follower can descend
quickly causing injury.
WARNING PINCHHAZARD. Follower can descend quickly,
causinginjury. Keep hands clear when aligning with container.
Inthe raising and lowering function, the lift could get hung up or the
descentcould be temporarily restricted. The lift could, in some situa-
tions,drop suddenly and be hazardous. If the follower plate does not
enter the drum properly,DO NOT ATTEMPT TO REPOSITION IT
WITHYOUR HANDS; release the downward pressure, raise the lift,
realign the drum and restart.
WARNING STANDCLEAR. When raising or lowering the lift,
keep clear and operate from a safe position.
Do not exceed maxi-
muminlet air pressure.
Hazardous pressure.
Can result in injury or
property damage.
WARNING HAZARDOUSPRESSURE. Do not exceed maxi -
muminlet air pressure of 150 psi (10.3 bar). Operating lift at high-
er pressure maycause lift damage and / or personal injury and / or
propertydamage. Do not service or clean pump, hoses or dispens-
ing valve while the system is pressurized.
WARNING DO NOT EXCEED DRUM PRESSURE LIMITS.
Knowthe pressure limitations of the drum and regulate the air pres-
sure within safe limits when supplying air to the follower plate.
CAUTION Be certain all operators of this equipment have
beentrained for safe working practices, understand it’s limita-
tions and wear their safety goggles / equipment as required.
OPTIONAL EQUIPMENT

67133 Drum Hold Down Bracket Kit

Includes (2 of each): Brackets, Clamps,

Screws, Nuts.

Pump Stabilizing Bracket Kit (includes hardware)

HFilter-Regulator-Lubricators

4-1/4’’, 6-1/4’’ - 65940 HD FRL w / Bracket
8’’ - 651730 HD FRL w / Bracket
10’’,12’’ - 651729 HD FRL w / Bracket

HPolyethylene Follower Plate seal

protector sheets

91364-10 Pkg of 10 - 20’’dia. (5 Gal. drum)
91363-10 Pkg of 10 - 32’’dia. (55 Gal. drum)
66353-1 for 8’’,10’’, 12” Motors 66354-1 for 3-1/4’’,4 -1/4’’,6’’ Motors

67136 Adapter Kit

67136 Adapter Kit Assembly
Y17-50-S Pipe Plug (2) ~
~Included in 67136 Adapter Kit Assembly.