EN
Product Safety Information
Intended Use:
These Drills are designed for drilling, valve guide reaming and cylinder honing operations in the automotive industry.
For additional information refer to Air Drill Product Safety Information Manual Form 04580353. Manuals can be downloaded from www.irtools.com.
Product Specifications
|
| Free | Chuck | Sound Level dB (A) | Vibration | ||
|
| Level | |||||
| Handle | Speed | Capacity | (ISO15744) | |||
Model(s) | (ISO8662) | ||||||
|
|
|
| ||||
Type |
|
|
|
|
| ||
| rpm | inches (mm) | Pressure (Lp) | Power (Lw) | m/s² | ||
|
| ||||||
|
| “KpA”=3dB(A) | “KwA”=3dB(A) | ||||
|
|
|
|
| |||
7802A | Pistol | 2000 | 3/8" (10) | 83.0 | 94.0 | 0.2 | |
|
|
|
|
|
|
| |
7803A | Pistol | 500 | 1/2" (13) | 83.0 | 94.0 | 0.3 | |
|
|
|
|
|
|
| |
7802RA | Pistol | 2000 | 3/8” (10) | 83.0 | 94.0 | 0.4 | |
7803RA | Pistol | 500 | 1/2” (13) | 83.0 | 94.0 | 0.3 | |
|
|
|
|
|
|
|
Installation and Lubrication
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a properly sized Safety Air Fuse upstream of hose and use an
1. | Air filter | 6. | Thread size |
2. | Regulator | 7. | Coupling |
3. | Lubricator | 8. | Safety Air Fuse |
4. | Emergency | 9. | Oil |
5. | Hose diameter | 10. | Grease - through fitting |
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled, degreased and parts be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest
04580452_ed4 |