Ingersoll-Rand 2, 8 and 10 BORES, 6, 5, 3-1/4 and 4 BORES Single Rod Cylinders, Double Rod Cylinders

QCushion Seal

Magnet (see table below)

Barrel (see table below)	Bushing (see table below)
Q “O” Ring (2)		Retaining Ring (see table below)
		Rod Seal Q

		Wiper Q
		“O” Ring Q
Cap (see page 7)	Q Wear Strip	Head (see page 7)
	(must be used)
Q Cushion Seal	Q Piston Seal (2)	Reciprocating Assembly (see page 6)

SINGLE ROD CYLINDERS

1-1/2”, 2”, 2-1/2”, 3-1/4” and 4” BORE

BORE SIZE	BARREL	BUSHING NUMBER		RETAINING	MAGNET
	NUMBER	STANDARD ROD	OVERSIZE ROD	RING	(OPTIONAL)
1-1/2”	119572-X	119454	N/A	119549-125	119681-150
2”	119573-X	119455	119456	119549-162	119681-200
2-1/2”	119574-X	119455	119456	119549-162	119681-250
3-1/4”	119575-X	119457	119458	119549-212	119681-325
4”	119576-X	119457	119458	119549-212	119681-400

NOTE: “X” = Stroke Length.

NOTE: Retaining ring must be replaced when replacing bushing.

NOTE: Optional magnet resides under wearstrip.

QIncluded in Seal Kit (see page 7).

Magnet (see table above)	Cushion Seal Q
Barrel (see table above)	Bushing (2) (see table above)
Q Cushion Seal	Retaining Ring (2) (see table above)
	Rod Seal (2) Q
	Wiper (2) Q

Head (see page 7)

Head (see page 7)		Q Wear Strip		“O” Ring (2) Q
		(must be used)
Q “O” Ring	(2)	Q Piston Seal (2)	Reciprocating Assembly (see page 6)

DOUBLE ROD CYLINDERS

1-1/2”, 2”, 2-1/2”, 3-1/4” and 4” BORE