Ingersoll-Rand LS500RLP-E, HU40A, Fulcrum Electric, FH2 manual Important Information, Form MHD56298

Form MHD56298

IMPORTANT INFORMATION:

•A copy of our “Safe Operating Practices” Manuals are always available free of charge either by downloading it from our Technical Publications website @ www.airwinch.com or by contacting the Factory at (800) 866-5457 for North America and (206) 624-0466 for International. The Safe Operating Practices manual must be read prior to anyone operating a Ingersoll-Randwinch or hoist. The manual form numbers are as follows:

“Safe Operating Practices Non-Man Rider™ Winches” Manual, Form No. MHD56250 “Safe Operating Practices for Man Rider™ Winches” Manual, Form No. MHD56251

“Safe Operating Practices for Pneumatic, Hydraulic and Electric Hoists” Manual, Form No. MHD56295

•Available winch options may require additional supplements to the basic winch manual.

•For Man Rider™ winches ensure a copy of the Man Rider™ supplement is made available to the operator prior to winch operation.

Winch Man Rider™ Supplements:

Model:	Publication No.
FA2, FA2.5,	MHD56046
FH2, FH2.5
FA5	MHD56042 and
	MHD56220
FA10	MHD56252
FA2.5A	MHD56236
FA2B and	MHD56207
HU40A
FH10MR	MHD56212
Fulcrum Electric	MHD56277
LS500HLP/	SAM0004
LS1000HLP

Model:	Publication No.
LS500RLP	SAM0011
LS1000RLP	SAM0012
LS150RLP	SAM0082
LS150RLP/500/	SAM0115
1000
LS150RLP and	SAM0120
LS150PLP-PH
LS500RLP-E	SAM0122
LS150RLP-	SAM0184
DP5M-F
LS150HLP	SAM0222

•We strongly recommend that ALL maintenance on Ingersoll-Randequipment be carried out by personnel certified by Ingersoll-Rand, or by Ingersoll-RandAuthorized Service Centers.

•Contact the Factory if in doubt about installation, operation, inspection and maintenance instructions.

•Use only Genuine Ingersoll-Randparts when maintaining or repairing a winch, hoist or any component of a winch or hoist.

•ANSI / ASME recommends that a winch or hoist (or any components of a winch or hoist) that has been repaired be tested prior to being placed into service:

* Winches - ANSI / ASME B30.7 (BASE MOUNTED DRUM HOISTS) Refer to section 7.2.2 - Testing.

*Hoists - ANSI / ASME B30.16 (OVERHEAD HOISTS - UNDERHUNG) Refer to section 16.2.2 - Testing.

Form MHD56298 Edition 2 November 2004 71441844

© 2004 Ingersoll-Rand Company