Ingersoll-Rand PD30R-XXX-XXX-C Major Valve, Pilot Valve, Part Group, Assembly Torque Requirements

107

￿105

135

133

￿134

PARTS LIST / PX30R-XXX-XXX-C AIR MOTOR SECTION

118 ￿ 169 168 ￿	PILOT VALVE
	PART GROUP
	172 ￿
￿ 174	171￿
121	170

￿173

167			173 ￿
140 199 ￿ 244 ￿ 243 ￿	132	￿ 166	121
			￿
			118
			174 ￿
			103
			101

141 ￿ ￿ 200	232 ￿ 233 232 ￿ 176 ￿
138 ￿
	Optional 94117 Muffler
111
139 ￿
137 ￿	201
136	127
107
236

MAJOR VALVE Figure 3

)ASSEMBLY TORQUE REQUIREMENTS (

NOTE: DO NOT OVERTIGHTEN FASTENERS.

ALL FASTENERS ARE METRIC.

(105)screw, 35 - 40 in. lbs (4.0 - 4.5 Nm).

(134) screw, 35 - 40 in. lbs (4.0 - 4.5 Nm).

LUBRICATION / SEALANTS

cApply Lubriplate FML-2 grease to all “O” rings, “U” cups and mating parts.

A replacement major valve service assembly is available separately, which includes the following:

637374 for models PD30R-XXX-XXX-C: 105 (4), 107 (2), 111, 132, 135, 136, 137, 138, 139, 140, 141, 166, 176 (2), 199, 200, 232 (2), 233, 236 (4), 243 and 244.

637374-1 for models PE30R-XXX-XXX-C: 76, 105 (4), 107 (2), 111, 132, 135, 136, 137, 138, 139, 140, 141, 166, 176 (2), 199, 200, 232 (2), 233, 236 (4), 243 and 244.

PD30R-XXX-XXX-C (en) Page 7 of 8