Samsung SCB-2000ND, SCB-2000PH manual When using a CS-Mount lens, C-mount adaptor, Video Cable

Installation

When using a CS-Mount lens

1. Please take off the CCD protection cap	2. Please attach the CS-Mount lens to the
and C-mount adaptor.	camera by screwing it in clockwise.
C-mount adaptor	CS-mount adaptor

CCD protection cap

Notes

•Please use the specified lens connection parts as shown in the picture below.

The use of the wrong sized parts may cause damage to the inside of the camera or result in poor fitting.

•The connection method varies depending on the type of monitor and accessories. Please refer to the user's manual for each instrument.

•Please turn off the power when connecting.

Using Coaxial Communications

•Coaxial Communications System

•OSD Control method

CAMERA	DVR	CONTROLLER
SET	MENU/ENTER	OSD KEY
UP	UP KEY	JOYSTICK UP
DOWN	DOWN KEY	JOYSTICK DOWN
LEFT	LEFT KEY	JOYSTICK LEFT
RIGHT	RIGHT KEY	JOYSTICK RIGHT
		DVR
		DVD

•Use of a lens which is too heavy affects the balance of the camera and may cause a malfunction. Please use a lens that weighs less than 450g.

•Please select Av mode if possible when adjusting the automatic light control (ALC) of an auto lens. Use of PK mode may cause hunting.

C-mount lens : 10 mm or less

CS-mount lens : 5 mm or less

• : BNC

• ---- : RS-485

• Video Cable

The camera's video output port is connected to the monitor with a BNC coaxial cable,

shown below : If the distance between the camera and the monitor exceeds the

Connecting to the Monitor

Please connect the video output terminal located on the back of the camera to the monitor.

CCD Camera Monitor

recommended maximum, please use an auxiliary video amp.

Distance	Recommended Cable Specification
300m	3C2V(RG-59/U)
450m	5C2V(RG-6/U)
600m	7C2V(RG-11/U)

Notes

•It is recommended that pure copper coax cable is used and not copper coated steel, as this will cause issues with the communication over the coaxial cable.

COLOR CCD CAMERA 12 User Guide COLOR CCD CAMERA 13 User Guide