Overview
Rear View
7
9
8
When Using Auto Iris Lens
1.Strip the insulation of the auto iris lens cable 8mm from the end.
8mm
Installation
2.Strip the insulation of the core of the auto iris lens cable to expose a 2mm length.
2mm
❿
*High Voltage Type
3.Remove the cover of the auto iris lens connector plug and solder the lens cable to the connector pin of the plug.
7 Power lamp : Lights up when the correct power is supplied to the camera. |
8 Function Setup Button |
•SETUP button : Displays the menu on the screen and uses enter sub menu. |
•Up&Down button : Used to move the cursor up or down in the menu screen. |
•Left&Right button : Used to move the cursor left or right in the menu screen. |
9 Video output terminal : |
Sends video signal and connects to the video input terminal of the monitor. |
❿ Power input terminal : Connects to the power appropriate to each model. |
|
| LENS | |
Pin No. | DC |
| VIDEO |
No.1 Pin | Damping - |
| Red (power) |
No.2 Pin | Damping + |
| NC |
No.3 Pin | Drive + |
| White (video signal) |
No.4 Pin | Drive - |
| Black (GND) |
Lens cable 
Connector
No.3 Pin
No.1 Pin
No.4 Pin
No.2 Pin
Installation
LENS
The lens is not supplied with this camera. Purchase a lens suitable for your environment. This camera accepts the auto iris lens and both
Notes
•To use the functions of this camera effectively it is recommended that a DC type Auto Iris lens is used.
•Keep the lens surface clean, if it becomes contaminated with dirt or fingerprints the picture quality suffers.
4. Please replace the auto iris lens connection plug cover and take off the CCD protection cap, and then attach the auto iris lens to the camera by
screwing it in clockwise.
5. Please insert the connection plug that is connected to the auto iris lens cable into the auto lens connector, which is located on the side of the camera.
When using a C-Mount lens 
Please take off the CCD protection cap and attach the
COLOR CCD CAMERA 10 User Guide | COLOR CCD CAMERA 11 User Guide |
