Samsung manual Thank you for purchasing a Samsung CCD Camera, SCB-2000N SCB-2000P SCB-2000ND

Thank you for purchasing a SAMSUNG CCD CAMERA.

Before operating the camera, confirm the camera model and correct input power voltage. In order to that you can understand this manual thoroughly, we will explain the model pert numbers.

nSCB-2000 SERIES

• NTSC MODEL	• PAL MODEL
SCB-2000N	SCB-2000P
SCB-2000ND	SCB-2000PD
	SCB-2000PH

n MODEL DESCRIPTION

• SCB-2000XX

__

POWER SOURCE

SIGNAL SYSTEM

•SIGNAL SYSTEM N → NTSC MODEL P → PAL MODEL

•POWER SOURCE

→AC 24V / DC 12V D → DC 12V

H → AC 230V

The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

INFORMATION -This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

WARNING : Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

WARNING : To prevent electric shock and risk of fire hazards:

◆Do NOT use power sources other than that specified.

◆Do NOT expose this appliance to rain or moisture.

This installation should be made by a qualified service person and

should conform to all local codes.