Samsung SCB-2000PH, SCB-2000ND, SCB-2000PD manual Lens, Exposure

Operating Your Camera

	MAIN	MENU
Select the function using	1.LENS	DC	Change the status using
the UP or DOWN button.			the LEFT or RIGHT button.
	2.EXPOSURE
	3.WHITE BAL	ATW
	4.SSDR	OFF
	5.BACKLIGHT	OFF
	6.SSNR3	ON
	7.DAY/NIGHT	COLOR
	8.SPECIAL
	9.EXIT	SAVE

2.Select a desired function using the Up and Down buttons.

•Place the cursor over a desired item.

3.Set up a selected item by using the Left and Right buttons.

4.To finish the setting, select ‘EXIT’ and press the SET button.

Notes

•An item with the icon also has sub menus. To select a sub menu, select an item with the icon and press the SET button.

•An item with the - - - icon is unavailable due to function settings.

LENS

Using this function, you can control the screen brightness.

1.When the SETUP menu screen is displayed, select‘LENS’by using the Up and Down buttons so that the arrow indicates‘LENS’.

2.Select the connected lens type by using the Left and Right buttons.

MAIN MENU

1.LENSDC 2.EXPOSURE

DC/Video : Select Auto Iris Lens

You can adjust the minimum shutter and maximum value of ESC shutter mode when DC Lens mode is selected.

Manual : Select Manual Lens

3.Each Lens mode has sub menu items as listed below.

-Brightness (DC, Manual) : Adjusts the video brightness.

- Level (VIDEO)	: Adjusts the level of video iris signals; the higher the level is,
	the brighter the video looks.

-FOCUS ADJ. (DC, VIDEO) : To adjust the DC and VIDEO lens focus correctly, you must activate the Focus Settings mode under each lens menu.

Activate the Focus Settings mode, adjust the lens focus, and then deactivate the settings mode. (The VIDEO lens requires an extra step: go to the sub menu of the Focus Settings mode and change the shutter speed to adjust the lens

brightness.)

- IRIS SPEED (DC) : Adjusts the Iris control speed of the DC lens. If the control speed is too slow or fast, please use this menu to adjust the speed.

Notes

•When using VIDEO lens, adjust the lens VR explained below first and set the focus using 'FOCUS ADJ.' menu.

•If color rolling occurs when using a DC lens, set Shutter to A.FLK.

•Some lenses may not work properly, depending on the setting of the BRIGHTNESS LEVEL.

•When Using a Video-Type Auto Iris Lens

❶Adjust the ALC adjustment terminal on the lens appropriately. In general, set it to AV (Average).

2It may not work properly depending on the installed lens. Set the Level VR of the lens to the optimal value.

3Set AGC to OFF and adjust the Lens VR to an appropriate brightness.

4Adjust the Lens VR, adjust the BRIGHTNESS, and then check if the screen brightness changes properly. Otherwise, adjust the Lens VR again.

EXPOSURE

MAIN	MENU
1.LENS	DC
2.EXPOSURE
3.WHITE BAL	ATW

1.When the SETUP menu screen is displayed, select‘EXPOSURE’by using the Up and Down buttons so that the arrow indicates‘EXPOSURE’.

2.Select a desired mode using the Up and Down buttons.

EXPOSURE SETUP
1.BRIGHTNESS	25
2.SHUTTER	ESC
3.AGC	HIGH
4.SENS-UP	OFF
5.RETURN

COLOR CCD CAMERA 16 User Guide COLOR CCD CAMERA 17 User Guide