TROUBLESHOOTING
If you experience the following problems while using the unit, this troubleshooting guide can help you.
No sound
Check if the unit is connected securely.
Make sure the TV or amplifier is working properly. Make sure the amplifier is set to receive DVD signal output.
No image
Check if the unit is connected securely.
Make sure the TV is working properly. Make sure the color system is set correctly.
Bad sound quality
Make sure the audio output mode is set correctly. Make sure the audio connection between the unit and amplifier is in place.
Disc cannot be played
There is no disc in the unit.
Put the disc on the disc tray properly with the label side up.
Clean the disc.
Moisture has condensed in the unit. Remove the disc and leave the unit on for about an hour.
The unit doesn't operate normally
Disconnect the power plug and insert it into the wall outlet again.
Remote control does not work
Remove barriers between the remote control and the unit.
Point the remote control at the remote control sensor of the unit.
Replace the batteries with new ones.
page45