16
NS-19ED200NA14/NS-24ED200NA14 Insignia 19"/24" LED TV/DVD Combo
www.insigniaproducts.com
Using coaxial (good)To connect a cable or satellite box using coaxial:
1Make sure that your TV’s power adapter is unplugged and all connected equipment is turned off.
2Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3Connect a coaxial cable (not provided) to the ANT/ CABLE jack on the back of your TV and to the coaxial out jack
on the cable or satellite box.
4Plug your TV’s power adapter into a power outlet, turn on your T V, then turn on the cable or satellite box.
5Press INPUT to open the INPUT SOURCE list.
6Press
S
or
T
to highlight TV, then press OK.
7If you cannot tune to channels you know exist, scan for channels. See “Autom atically scanning for channels” on
page 47.
Notes
• Use a coaxial cable to eliminate interference and noise from radio
waves.
• Do not bundle the coaxial cable with the power adapter or other cables.
Cable or
satellite box
Coaxial cable
Back of TV
Coaxial cable
connector
Coaxial
jack
On your TV