52
NS-20ED310NA15 Insignia 20" LED TV/DVD Combo
www.insigniaproducts.com
TV Speakers—You can select:
Auto (default setting)—To automatically
turn off the TV speakers when an audio
cable is connected to the /AUDIO OUT
jack. When you disconnect the cable, TV
speakers automatically turn on.
On—To always play audio through the TV
speakers.
Off—To turn off the TV speakers.
Digital Audio/SPDIF—Sends digital audio to
an external audio system. You can select:
RAW (to pass through the original digital
audio sound).
PCM (to output audio in 2-channel stereo).
Digital Audio Delay—Fine tunes the audio
when it is not in sync with the video.
MTS/SAP—(Analog channels only) Selects the
audio mode. You can select:
Mono—Select this option if there is noise
or static on weak stereo broadcasts.
Stereo—Select this option for programs
broadcast in stereo.
SAP—Select this option to listen to a
secondary audio program, if available.
Audio Languag e—(Digital channels only)
Selects an alternate audio language, if
available.
Headphones/Audio Out—You can use the
/AUDIO OUT jack on the side of your TV to
connect headphones, a home theater system,
or a sound bar. When a device is connected to
the /AUDIO OUT jack, the TV speakers are
muted. You can select:
Headphones/Audio Out
Variab le—Select this option to use the
remote control tha t came with your T V to
control the audio from headphones or the
home theater system or sound bar you
connected to the /AUDIO OUT jack.
Audio Out Fixed— Select this option to
use the remote control that came with the
home theater system or sound bar you
connected to the /AUDIO OUT jack to
control the audio.
Reset Audio Settings—Reset all audio settings
to factory defaults.
4Press W or X to adjust the option, or press S or
T to select a setting.
5Press TV-MENU to return to the previous menu,
or press EXIT to close the menu.
Select the audio out mode
If your TV is on when you connect a device to the
/AUDIO OUT jack on the side of your TV, a screen
opens where you select which audio out mode you
want to use.
1Connect headphones, an amplifier, a home
theater system, or a sound bar to the
/AUDIOOUT jack on the side of your TV. The
following screen opens.
2Press W or X to highlight the audio out mode
you want to use, then press ENTER. You can
select:
Headphones/Audio Out Variable—Select
this option to use the remote control that
came with your TV to control the audio from
headphones or the home theater system or
sound bar you connected to the /AUDIO
OUT jack.
Audio Out Fixed— Select this option to use
the remote control that came with the home
theater system or sound bar you connected to
the /AUDIO OUT jack to control the audio.
Note
You can also press MTS/SAP one
or more times to select the
audio mode.