56
NS-20ED310NA15 Insignia 20" LED TV/DVD Combo
www.insigniaproducts.com
Add or change a channel label
If a channel is not already labeled, you can label the
channel to make it easier to identi fy. You can also
relabel a channel that is already labeled.
1Press TV-MENU. The on-screen menu opens.
2Press W or X to highlight CHANNELS, then press
T or ENTER. The CHANNELS menu opens.
3Press S or T to highlight Channel Labels, then
press ENTER. The CHANNELS· CHANNEL LABELS
screen opens with the channel number field
highlighted.
4Press S or T to select the channel you want to
label, then press X to move to the channel label
field.
5Press S or T to select a character, then press W
or X to move to the previous or next character
position. Repeat this step to enter additional
characters. You can enter as many as 11
characters.
6When you have completed the label, press
ENTER.
7Press EXIT to close the menu.
Check the digital signal strength
You can check the digital signal strength to
determine if you need to adjust your antenna or
digital cable input. The higher the signal strength,
the less likely you are to experience picture
degradation.
1Press TV-MENU. The on-screen menu opens.
2Press W or X to highlight CHANNELS, then press
T or ENTER. The CHANNELS menu opens.
3Press S or T to highlight Channel Strength,
then press ENTER. The Channel Strength screen
opens showing the signal strength meter.
4Press TV-MENU to return to the previous menu,
or press EXIT to close the menu.