Insignia
Connecting a PC | 4 Press the CH+ or CH– button to select Input. |
To connect a PC:
1 Plug a
Audio
2Plug the other end of the
3Plug an audio cable into the
4Plug the other end of the audio cable into the audio out jack on the computer.
To view the computer screen on your TV:
1Turn on your TV.
2Press the INPUT button one or more times to select
3Turn on your computer, and check your computer system requirements. See your computer documentation for more information.
4Adjust the screen resolution and other settings on your computer, if necessary.
Using your TV
Turning your TV on and off
To turn your TV on and off:
1Make sure that the power cord is connected to your TV and an electrical outlet.
2Press the 
button to turn on your TV.
5Press the ENTER, VOL+, or VOL– button to select Antenna or Cable.
Setting up the channel list
To set up the channel list:
1Press the MENU button to open the
2Press the CH+ or CH– button one or more times to select Channel.
3Press the ENTER, VOL+, or VOL– button to open the Channel menu. The Auto Searching option is highlighted.
4Press the ENTER, VOL+, or VOL– button to start searching for channels. If you want to stop the search, press the MENU button.
3Press the 
button again to turn off your TV.
Selecting the TV source
To select the TV source:
1Press the MENU button to open the
2Press the CH+ or CH– button one or more times to select Channel.
Adding and erasing channels
To add and erase channels:
1Press the number buttons for the channel you want to add or erase.
2Press the MENU button to open the
3Press the CH+ or CH– button one or more times to select Channel.
4Press the ENTER, VOL+, or VOL– button to open the Channel menu.
3Press the ENTER, VOL+, or VOL– button to open the Channel menu.
10 |