Insignia NS-20WLCD 13

Insignia NS-20WLCD 20” LCD TV

Adjusting the clock and phase	3 Press the ENTER, VOL+, or VOL– button to
Adjust the clock frequency if the display image	open the Sound menu.
shimmers or has rainbow-like noise.
Adjust the phase setting if the display image is
blurry.
blurry.

To adjust the clock and phase:

1 Press the MENU button to open the OSD.

2Press the CH+ or CH– button one or more

times to select Image.

3 Press the ENTER, VOL+, or VOL– button to	4	Press the CH+ or CH– button one or more
open the Image menu.	4	Press the CH+ or CH– button one or more
open the Image menu.		times to select MTS.
		times to select MTS.
	5	Press the ENTER, VOL+, or VOL– button
	5	Press the ENTER, VOL+, or VOL– button
		one or more times to select the stereo mode
		one or more times to select the stereo mode
		you want. You can select:
		you want. You can select:

4Press the CH+ or CH– button one or more times to select Clock or Phase.

5Press the VOL+ or VOL– button to adjust the option.

Adjusting the image position

•Mono–Select to output the same sound to both speakers.

•Stereo–Select to output the sound in stereo. The program must be broadcast in stereo for this option to work. If you have problems listening to a stereo broadcast, select Force Mono to listen to the program in mono.

•SAP–Select to listen to a secondary audio program. The program must have an secondary audio program for this option to work.

To adjust the image position (alignment):

1Press the MENU button to open the OSD.

2Press the CH+ or CH– button one or more times to select Image.

3Press the ENTER, VOL+, or VOL– button to open the Image menu.

4Press the CH+ or CH– button one or more times to select Image Position.

5Press the ENTER, VOL+, or VOL– button to open the Image Position menu.

6Press the CH+, CH–, VOL+, or VOL– button to adjust the image position.

You can also press the MTS/SAP button to select the sound mode.

Customizing sound

To customize the sound settings:

1Press the MENU button to open the OSD.

2Press the CH+ or CH– button one or more times to select Sound.

3Press the ENTER, VOL+, or VOL– button to open the Sound menu.

4Press the CH+ or CH– button to select Bass, Treble, or Balance.

•Bass–Adjusts low sounds.

•Treble–Adjusts high sounds.

•Balance–Adjusts the left and right volumes.

5Press the VOL+ or VOL– button to adjust the option.

Adjusting the sound

Setting the stereo mode

To set the stereo mode:

1Press the MENU button to open the OSD.

2Press the CH+ or CH– button one or more times to select Sound.