31
Insignia 22" LED TV
www.insigniaproducts.com
Using analog audio
When you connect a home theater system to the /AUDIO OUT jack, the TV speakers are muted.
To connect a home theater system using analog audio:
1Make sure that your TV’s power cord is unplugged and the home theater system is turned off.
2Connect a 3.5mm audio cable (not provided) to the /AUDIO OUT jack on the side of your TV and to the
AUDIO IN jacks on the analog home theater system.
3Plug your TV’s power cord into a power outlet, then turn on your TV and the home theater system.
Notes
• For information about selecting the audio out mode for a home theater,
see the “Headphone/Audio Out“ option in “Adjusting sound settings”
on page42.
• You can connect headphones, an amplifier, a home theater system, or a
sound bar to the /AUDI O OUT jack. If you want to use headphones,
you need to disconnect the amplifier, home theater system, or sound
bar.
3.5mm audio
cable
Home theater system
Side of TV
3.5mm audio
cable connector
/AUDIO OUT
jack
On your TV