37
Insignia 22" LED TV
www.insigniaproducts.com
CIf you select Satellite Box, a message asks
how you connected the satellite box to
your TV:
•Select HDMI, Component, or AV, then
press ENTER if you connected a satellite
box to your TV using one of these cables.
Read the message, then press ENTER to
close the wizard.
•Select Coaxial, then press ENTER if you
connected a satellite box to your TV usi ng
a coaxial cable. Read the message, then
press ENTER to start the channel scan (VHF
channels only).
14 To watch TV, press INPUT, press S or T to
highlight the video input source for your TV in
the INPUT SOURCE list, then press ENTER.
• If your TV is connected to an antenna, cab le TV
(no box), or cable or satellite TV box usin g a
coaxial cable, select TV.
• I f your TV is connected to a cable or satellite
box using an HDMI cable or HDMI cable with a
DVI adapter, select HDMI 1 or HDMI 2.
• I f your TV is connected to a cable or satellite
box using a component video cable, select
Component/AV.
• I f your TV is connected to a cable or satellite
box using a composite video cable, select
Component/AV.
Understanding the basics

Turning your TV on or off

To turn your TV on or off:
1Make sure tha t the power co rd is connec ted to a
power outlet.
2Press (power) to turn on your TV. The power
indicator turns off.
3Press (power) again to turn off your TV. Your
TV enters standby mode, and the power
indicator turns red.

Selecting the video input source

To se lec t t he v id eo i np ut s ou rce :
1Turn on your TV, then press INPUT. The INPUT
SOURCE list opens.
2Press S or T to select a video input source, then
press ENTER.
Note
You can press EXIT to stop the auto channel
search, but you will need to run the auto
channel search again to create a channel
list.
Warning
When your TV is in standby mode, it is still
receiving power. To completely disconnect
power, unplug the power cord.
Note
If your TV does not receive an input signal
for several minutes, it automatically goes
into standby mode.