
Problem
Good picture, but no sound.
Audio noise or static.
Solution
•Increase the volume.
•Press MUTE to make sure that the sound is not turned off.
•Make sure that the audio mode is set to STEREO or MONO. For more information, see “Selecting the audio mode” on page 19.
•Make sure that headphones are not connected to your TV. When headphones are connected, sound from the TV speakers is muted.
•Move radio frequency equipment, such as cell phones, away from your TV.
Specifications
Design specifications are subject to change without notice. Dimensions and weight specifications are approximate.
TV type | LCD |
TV panel | |
| |
|
|
Channels | VFH: 2 - 13 |
| UHF: 14 - 69 |
| CATV: 1 - 125 |
| CADTV: 1 - 135 |
| DTV: 2 - 69 |
Remote control
Audio multiplex | BTSC system |
Problem
Remote control does not work.
Remote control does not control connected HDMI devices.
Solution
•Make sure that the remote control batteries are installed correctly. For more information, see “Installing remote control batteries” on page 7.
•Replace the remote control batteries. For more information, see “Installing remote control batteries” on page 7.
•Make sure that the power cord is plugged into a working power outlet.
•Make sure that the INlink Control option is set to On. See “Using INlink” on page 31.
•Make sure that the HDMI CEC control is turned on for the connected device.
•Make sure that the connected HDMI device is
Audio output | 3W × 2 | |
Power requirement | AC 120 V, 60 Hz | |
|
| |
Power consumption | 25 W (19") | |
30 W (22") | ||
| ||
|
| |
Dimensions | ||
| 18.1 × 13.1 × 5.51 inches (460 × 333 × 140 mm) | |
| ||
| 20.83 × 14.65 × 5.51 inches (529 × 372 × 140 mm) | |
|
| |
Weight | ||
| 7.1lbs. (3.2kg) | |
| ||
| 8.38 lbs. (3.8 kg) | |
|
| |
Input terminals | HDMI (3) | |
| Component video with L/R audio (1) | |
| Composite video with L/R audio (1) | |
| VGA with audio (1) |
General
Problem | Solution |
| |||
Cannot turn to one or more | • The program may be blocked by parental | ||||
channels. | |||||
controls. For more information, see “Blocking | |||||
| |||||
| unrated TV” on page 24 or “Setting parental | ||||
| control levels” on page 25. |
| |||
| • The control buttons on the front of your TV may | ||||
| be locked. For more information, see “Locking | ||||
| control buttons” on page 23. |
| |||
| • The channel may have been deleted from the | ||||
| channel list. You can still tune to the channel | ||||
| using the number buttons. For more |
| |||
| information, see “Selecting a channel” on | ||||
| page 16. You can also add the channel to the | ||||
| channel list. For more information, see “Hiding | ||||
|
| ||||
|
|
|
|
| |
Password is lost. | • On the Parental Controls menu, enter 9999 as | ||||
| |||||
| the password, then set a new password. For | ||||
| more information, see “Setting or changing the | ||||
|
| ||||
Cannot access some settings | • If a setting or option is grayed out, it is not | ||||
or options. | |||||
available in the current mode. |
| ||||
|
| ||||
|
|
|
|
| |
TV cabinet creaks. | • When you are using your TV, the temperature | ||||
| |||||
| inside the cabinet increases. This causes the | ||||
| cabinet to creak. This is not a malfunction. | ||||
Buttons do not work. | • Unplug the power cord, wait a few seconds, then | ||||
| |||||
| plug the power cord back in and turn on your TV. | ||||
|
|
|
|
| |
Button labels are not lit on the | If your TV is turned on and the button labels on the front | ||||
front of the TV. | of your TV are not lit, press any button except |
|
| to light | |
|
| ||||
| the button labels. Then press the button you want. Button | ||||
| presses must be within 10 seconds of each other. |
| |||
|
|
|
|
|
| Antenna (1) |
| USB (1) |
|
|
Output terminals | Headphone jack (1) |
| Digital audio (1) |
38 | www.insigniaproducts.com |