Insignia 19"/22" LED-LCD HD TV

Install the stand or

stand column.

 

2 Remove the two screws holding the TV to its

wall-mount bracket

 

Installing the stand

To install the stand:

1Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches.

2Secure the stand to the screen with the three provided screws.

3Remove the stand column.

4Secure the wall-mount bracket to the back of your TV using the four M4 screws provided with bracket.

TV components

Adjusting the viewing angle

Caution

When adjusting the viewing angle, be careful not to tip over your TV.

To adjust the viewing angle:

• Tilt the screen forward 5° or backward 10°.

Accessories

•Remote control

•Remote control holder

•Batteries (2 AAA)

•Component cable

•Audio cable

•Cleaning cloth

•TV stand and screws

•Quick Setup Guide

Front

10o

-5

Installing a wall-mount bracket

Note

To avoid interference between the jacks, wall-mount bracket, and wall, the wall-mount bracket must be more than 40 mm thick, and the RF or VGA cable must have a 90-degree plug.

 

1

2

 

 

 

 

 

#

Item

 

Description

1

Remote control sensor

Receives signals from the remote control. Do not block.

 

 

 

 

 

 

 

Lights blue when your TV is turned on.

2

Power indicator

Lights red when your TV is in standby mode.

 

 

 

Turns off when the power cord is unplugged.

To attach your TV to a wall-mount bracket:

1Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches.

www.insigniaproducts.com

5