13
Insignia 24" LED TV
www.insigniaproducts.com
Using DVI (same as HDMI but requires an audio connection)
To connect a cable or satellite box using DVI:
1Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the
adapter to the DVI OUT jack on the cable or satellite box.
4Connect the other end of the cable to the HDMI1/ARC/DVI jack on the side of your TV.
5Connect a 3.5mm audio cable (not provided) to the PC/DVI AUDIO IN jack on the back of your TV and to the
AUDIO OUT jacks on the cable or satellite box.
6Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
7Press INPUT to open the INPUT SOURCE list.
8Press S or T to highlight HDMI1, then press ENTER.
Note
You must use the HDMI1 /ARC/DVI jack to connect a cable or satellite box.
If you use another HDMI jack, you will not hear sound from the TV speakers.
Note
When you connect the audio using the PC/DVI AUDIO IN jack, the audio
output is analog.
Cable or
satellite box
HDMI cable with
HDMI-DVI adapter
3.5mm audio cable
Side of TV
HDMI cable
connector
3.5mm audio
connector
HDMI1/
ARC/DVI
jack
PC/DVI
AUDIO IN
jack
On your TV
Back of TV