Insignia NS-24L120A13 manual Specifications, General

NS-24L120A13

General

Problem	Solution
No power	• Make sure that the power cord is correctly
	connected to your TV and a power outlet.
	• Unplug the power cord, wait 60 seconds, then
	plug the cord back in and turn on your TV.
	• Other devices (for example, surround sound
	receiver, external speakers, fans, or hair dryers)
	may be interfering with your TV. Try turning off
	one device at a time to determine which device
	is causing interference. After you have
	determined which device is causing
	interference, move it further from the TV to
	eliminate the interference.
“No signal” error	• Press INPUT and make sure that you have
message is displayed
	selected the correct input for the device or
	service you are trying to use.
	• If you are using a cable or satellite box, use the
	remote that came with that box to change
	channels.
	• Make sure that you have the correct input
	selected to view channels from the cable or
	satellite box.
After Auto Channel	• Reception can vary by channel depending on the
Search, there are no
	broadcast power level of a given station. Contact
channels
	your cable or satellite TV provider.
	• Make sure that the antenna or cable/satellite TV
	is connected securely to your TV.
	• Try replacing the cable between the
	antenna/cable or cable/satellite box and your
	TV.
One or more channels	• Make sure that the channels are not blocked. See
do not display
	“Setting parental control levels.”
	• Make sure that the channels are not hidden. The
	channel may have been deleted from the
	channel list. You can tune to the channel by
	pressing the number buttons or you can add the
	channel back to the channel list. See “Hiding
	channels” in the online User Guide.
	• If you are using a cable or satellite box, use the
	remote that came with that box to change
	channels.
	• Make sure that you have the correct input
	selected to view channels from the cable or
	satellite box.
	• If you are using an antenna, the digital channel
	signal may be low. To check the digital channel
	signal strength, see “Checking the digital signal
	strength” in the online User Guide.
Password is lost	• Enter 9999 to access parental controls, then set
	a new password. See “Setting or changing the
	password” in the online User Guide.
Some settings cannot be	• If a setting is grayed, the setting is not available
accessed
	in the current video input mode.
TV cabinet creaks	• When the TV is in use, the temperature rises
	naturally and may cause the cabinet to expand
	or contract which can cause a creaking noise.
	This is not a malfunction.
Control buttons do not	• Make sure that the Button Lock option is set to
work
	Off. See “Locking control buttons” in the online
	User Guide.
	• Unplug the power cord, wait a few seconds, then
	plug the cord back in and turn on your TV.
TV keeps turning off	• Make sure that the sleep timer is not turned on.
	See “Setting the sleep timer” in the online User
	Guide.

Notes

• If the problem is not solved by using these troubleshooting instructions, turn off your TV, then turn it on again.

• Additional troubleshooting information is in your online User Guide. Go to www.insigniaproducts.com, click Support & Service, enter your model number in the Product Search field, then click Search.

Specifications

Specifications are subject to change without notice.

Dimensions and weight

Without stand	23.03 × 3.98 × 15.59in. (58.5 × 10.1 × 39.6 cm)
	10.56 lbs. (4.8 kg)
With stand	23.03 × 7.87 ×17.17 in. (58.5 × 20 × 43.6 cm)
	11.22 lbs. (5.1 kg)

Screen

Screen size measured	23.6 in.
diagonally
Display type	LCD
Panel 60 Hz vs.120 Hz	60Hz
Display resolution	720p
Panel resolution	1366 (H) × 768 (V)
Aspect ratio	16:9
Contrast ratio (typical)–panel	2000:1
Dynamic contrast ratio–	30,000:1
list value
Brightness (center typical)	250 nits
cd/m2
Comb filter	3d y/c digital
Response time	8.5 ms
Horizontal viewing angle	160
Vertical viewing angle	160

Display resolutions

HDMI 1.3	1080p, 1080i, 720p, 480p, 480i
Component video	1080i, 720p, 480p, 480i

Tuner

Analog	NTSC
Digital	ATSC, 8-VSB, Clear-QAM

Inputs

HDMI	2 (back)
	E-EDID compliant
	HDCP compliant
Component video	1 (back)
Composite video	1 (back)
Shared audio (component	Yes
and composite)
S-Video	No
PC/VGA	1 (back)
3.5mm PC audio input	1 (back)
USB	1 (back)

Support JPEG and firmware upgrade

www.insigniaproducts.com 5