55
NS-29D310NA15 Insignia 29" LED TV
www.insigniaproducts.com
Adjusti ng the sound

Adjusting sound settings

You can adjust sound settings to improve the sound
quality. You also can reset all sound settings to the
factory default.
1Press MENU. The on-screen menu opens.
2Press W or X to highlight AUDIO, then press T or
ENTER. The AUDIO menu opens.
3Press S or T to highlight an option, then press
ENTER to access the option. You can select:
•Sound Mode—Selects the sound mode. You
can select:
•Standard—Balances treble and bass. This
setting is good for watching standard TV
broadcasts.
•Theater—Enhances treble and bass for a rich
sound experience. This setting is good for
watching DVDs, Blu-ray discs, and HDTV.
•Music—Preserves the original sound. This
setting is good for listening to music.
•News—Enhances vocals for TV audio. This
setting is good for watching news
broadcasts.
•Custom—Lets you manually adjust sound
settings.
•Balance—Adjusts the balance between the left
and right audio channels.
•Bass—Adjusts the low sounds.
•Treble —Adjusts the high sounds.
•TV Speakers—Selects where to play TV audio.
When you connect headphones to your TV,
audio plays through both the headphones and
the TV speakers. You can select:
•Auto (default setting)—Automatically turns
off the TV speakers when you connect a
device to the AUDIO OU T/ jack. When the
device is disconnected, the TV speakers turn
on automatically.
•On—Always plays the audio through the TV
speakers. If a device is connected to the
AUDIO OUT/ jack, the audio is played
through both the TV speakers and the
device.
•Off—Turns off the TV speakers and plays the
audio only through the device connected to
the AUDIO OUT/ jack. If you disconnect
the device, the TV speakers remain turned
off.
•Digital Audio/SPDIF—Sends digital audio to an
external audio system. You can select:
•RAW (to pass through the original digital
audio sound).
•PCM (to output audio in 2-channel stereo).
•Digital Audio Delay—Fine tunes the audio
when it is not in sync with the video.
•MTS/SAP—(Analog channels only) Selects the
audio mode. You can select:
•Mono—Select this option if there is noise or
static on weak stereo broadcasts.
•Stereo—Select this option for programs
broadcast in stereo.
•SAP—Select this option to listen to a
secondary audio program, if available.
•Audio Language D efault—(Digital channels
only) Selects an alternate audio language, if
available.
•Headphones/Audio Out—You can use the
AUDIO OUT/ jack on the side of your TV to
connect headphones, a home theater system,
sound bar, or external speaker system. When a
device is connected to the AUDIO OUT/ jack,
the TV speakers are muted. You can select:
•Headphones/Audio Out Variable—Select
this option to use the remote control that
came with your TV to control the audio from
headphones, a home theater system, a sound
bar, or an external speaker system you
connected to the AUDIO OUT/ jack.
•Audio Out Fixed—Select this option to use
the remote control that came with the home
theater system, sound bar, or external
speaker system you connected to the AUDIO
OUT/ jack to control the audio.
•Reset Audio Settings—Reset all audio settings
to factory defaults.
Note
You can also press MTS/SAP one or more
times to select the audio mode.