21
NS-32E400NA14 Insignia 32" LED TV
www.insigniaproducts.com
Using composite video (good)
To connect a DVD or Blu-ray player using composite video:
1Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
2Connect an AV cable (not provided) to the COMPONENT /AV Y/VIDE O jack and L and R audio jacks on the back
of your TV and to the AV OUT jacks on the DVD or Blu-ray player.
3Plug your TV’s power cord into a power outlet, then turn on your TV.
4Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the
documentation that came with the player.
5Press INPUT to open the INPUT SOURCE list.
6Press S or T to select Component/AV, then press ENTER.
Notes
Cables are often color-coded to match color-coded jacks.
The yellow video connector on the AV cable connects to the green
COMPONEN T/AV Y/VID EO jack.
Notes
•The COMPONENT/ AV Y/VIDEO, PB, and PR video jacks (used to connect
a component device) share the L and R audio jacks with the
COMPONEN T/AV Y/VID EO jack (used to connect a composite de vice).
When you connect the audio using the Land R audio jacks, the audio
output is analog.
AV cable (composite video cable)
Back of TV
Composite
video cable
connector
Composite
video jack
Analog audio
cable
connectors
Analog audio
jacks
DVD or Blu-ray player
On your TV