42
Insignia 32" LED TV
www.insigniaproducts.com
Setting the power on picture mode
You can set the picture mode your TV uses when
you turn it on.
To set the power on picture mode:
1Press MENU. The on-screen menu opens.
2Press W or X to highlight SETTINGS, then press
T or ENTER. The SETTINGS menu opens.
3Press S or T to highlight Reset to Default, then
press ENTER. The SETTINGS· RESET TO DEFAULT
menu opens.
4Press S or T to highlight Power on in Vivid
Mode, then press ENTER.
5Press S or T to highlight On (when you turn on
your TV, it will be in Vivid picture mode) or Off
(when you turn on your TV, it will be in the
picture mode it was in before you turned it off),
then press ENTER.
6Press MENU to return to the previous menu, or
press EXIT to close the menu.
Adjusting the computer image
When you connect a computer to your TV using the
VGA jack, you may need to adjust the computer
image to improve the quality.
To adjust the computer image:
1Make sure that your TV is in VGA mode. For
more information, see “Selecting the video
input source” on page 38.
2Press MENU. The on-screen menu opens.
3Press W or X to highlight SETTINGS, then press
ENTER. The SETTINGS menu opens.
4Press S or T to highlight Computer Settings,
then press ENTER. The SETTINGS ·COMPUTER
SETTINGS menu opens.
5Press S or T to highlight an option, then press
ENTER to access the option. You can select:
•Auto Adjust—Automatically adjusts the
image settings such as position and phase.
•H. Position—Moves the image right or left.
•V. Pos it ion —Moves the image up or down.
•Clock—Minimizes vertical stripes in th e
screen image.
•Phase—Adjusts the focus of stable image s.
•Reset Computer Settings—Resets all
computer settings to factory mode.
6Press W or X to adjust the option, or press S or
T to select a setting.
7Press MENU to return to the previous menu, or
press EXIT to close the menu.
Note
The Computer Settings option is only
available when a computer is connected
to the VGA jack on the back of your TV.