14
Insignia 39" LED TV
www.insigniaproducts.com
Using DVI (same as HDMI but requires an audio connection)
1Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the
adapter to the DVI OUT jack on the cable or satellite box.
4Connect the other end of the cable to one of the HDMI jacks on the side of your TV.
5Connect a 3.5mm RCA stereo audio cable (not provided) to the PC AUDIO IN jack on the back of your TV and to
the AUDIO OU T jacks on the cable or satellite box.
6Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
7Press INPUT to open the INPUT SOURCE list.
8Press S or T to highlight HDMI1 or HDMI2, then press ENTER.
Note
When you connect the audio using the PC AUDIO IN jack, the audio output
is analog.
Cable or
satellite box
HDMI cable with
HDMI-DVI adapter
3.5mm RCA stereo audio cable
Side of TV
HDMI cable
connector
3.5mm audio
connector
HDMI jack PC AUDIO
IN jack
On your TV
Back of TV