15
NS-39D310NA15 Insignia 39" LED TV
www.insigniaproducts.com
Using component video (better)
1Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3Connect a component video cable (not provided) to the Y/VIDEO, PB, and PR jacks on the back of your TV and
the component video out jacks on the cable or satellite box.
4Connect a RCA audio cable (not provided) to the AUDIO LandR jacks on the back of your TV and to the audio
out jacks on the cable or satellite TV box.
5Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
6Press INPUT to open the INPUT SOURCE list.
7Press S or T to highlight Component/AV, then press ENTER.
Note
Cables are often color-coded to match color-coded jacks.
Notes
•The Y/VIDEO, PB, and PR video jacks (used to connect a component
device) share the AUDIO L and R jacks with the Y/VIDEO jack (used to
connect a composite device).
When you connect the audio using the AUDIO Land R jacks, the audio
output is analog.
RCA audio cable
Cable or
satellite box
Component video cable
Back of TV
Component
video cable
connectors
Analog
audio cable
connectors
Analog
audio jacks
Component
video jacks
On your TV