21
NS-50E440NA14 Insignia 50" LED TV
www.insigniaproducts.com
Using component video (better)
To connect a DVD or Blu-ray player using component video:
1Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
2Connect a component video cable (not provided) to the COMPONENT /AV Y/VIDE O, PB, and PR jacks on the
back of your TV and to the COMPONENT OUT jacks on the DVD or Blu-ray player.
3Connect an audio cable (not provided) to the COMPONENT/AVL/R audio jacks on the back of your TV a nd to
the L/R AUDIO OU T jacks on the DVD or Blu-ray player.
4Plug your TV’s power cord into a power outlet, then turn on your TV.
5Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the
documentation that came with the player.
6Press INPUT to open the INPUT SOURCE list.
7Press S or T to select Component/AV, then press ENTER.
Note
Cables are often color-coded to match color-coded jacks.
Notes
•The COMPONEN T/AV Y/VIDEO, PB, and PR video jacks (used to connect
a component device) share the L and R audio jacks with the
COMPONEN T/AV Y/VID EO jack (used to connect a composite de vice).
When you connect the audio using the Land R audio jacks, the audio
output is analog.
Back of TV
Audio cable
Component
video cable
DVD or Blu-ray player
Component
video cable
connectors
Analog audio
cable
connectors
Component
video jacks
Analog
audio jacks
On your TV