22
Insignia 50" LED TV
www.insigniaproducts.com
Using composite video (good)
To connect a DVD or Blu-ray player using composite video:
1Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
2Connect an AV cable (not provided) to the COMPONENT /AV Y/VIDE O jack and L and R audio jacks on the back
of your TV and to the AV OUT jacks on the DVD or Blu-ray player.
3Plug your TV’s power cord into a power outlet, then turn on your TV.
4Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the
documentation that came with the player.
5Press INPUT to open the INPUT SOURCE list.
6Press S or T to select Component/AV, then press ENTER.
Notes
Cables are often color-coded to match color-coded jacks.
The yellow video connector on the AV cable connects to the green
COMPONEN T/AV Y/VID EO jack.
Notes
•The COMPONEN T/AV Y/VIDEO, PB, and PR video jacks (used to connect
a component device) share the L and R audio jacks with the
COMPONEN T/AV Y/VID EO jack (used to connect a composite de vice).
When you connect the audio using the Land R audio jacks, the audio
output is analog.
AV cabl e
(composite video cable)
Back of TV
Composite
video cable
connector
Composite
video jack
Analog audio
cable
connectors
Analog
audio jacks
DVD or Blu-ray player
On your TV