Insignia NS-5HTV 5” Hand Held TV

3Press the UP/DOWN buttons to highlight ATV Source, then press ENTER repeatedly to select AIR, ATV CABLE-STD, ATV CABLE-HRC, or ATV CABLE-IRC.

4Press the LEFT button twice to exit the Setup Menu.

Setting the menu transparency

To set the menu transparency:

1Plug in your TV and turn it on by pressing the POWER button.

2Press the MENU button. The Setup Menu opens.

3Press the UP/DOWN buttons to highlight Transparent, then press ENTER to toggle between On (transparent) and Off (opaque).

4Press the LEFT button twice to exit the Setup Menu.

Improving reception

When the signal is weak, causing a poor or distorted picture, try placing your TV near a window or connecting an external antenna to the TV to improve reception.

Connect the external antenna (not provided) to the RF IN jack on the right side of the TV.

Using your TV as a monitor

To use your TV as a monitor:

1Connect the AV cable from the AV OUT jacks (yellow plug to the Video jack, red plug to the right audio jack, and white plug to the left audio jack) of the external signal source.

2Connect the AV cable’s 1/8” plug to the AV IN jack of your TV.

3Press INPUT button on the TV to switch to AV mode.

18www.insignia-products.com