Insignia
Using the clock
When the stereo is turned off, the
To adjust the time:
1Press Mode once to enter the clock setting mode. The time flashes in the LCD display.
2Press Skip Backward/Tuning - once to decrease the hour.
3Press Skip Forward/Tuning + once to increase the hour.
4Press Volume - once to decrease the minute.
5Press Volume + once to increase the minute.
6Press and hold any of these buttons for more than 1 second to enter the fast setting mode. After the time is changed, the seconds reset to “00” and the clock stops running.
7To confirm the time and exit clock setting mode, press Mode. The clock starts.
Note:
If there is no button operation for 10 seconds, the stereo automatically exits the clock setting mode.
Adjusting the sound
Volume
To adjust the volume:
1Press Volume + as necessary to increase the volume.
2Press Volume - as necessary to decrease the volume.
Preset equalizer
The preset equalizer provides five ranges of control (NORMAL, ROCK, JAZZ, POP, AND CLASSIC) for the audio frequency spectrum in narrow and distinct sections.
Press EQ to select the best response that suits your type of music and individual taste.
Using the radio
After pressing a button while using the radio, the LCD display shows the operation. Five seconds after any operation is completed, the LCD will
Tuner mode
1Press Tuner/Band once to turn on the stereo and restore the band and frequency playing when the stereo was turned off.
2In Tuner mode, Press Tuner/Band to toggle between AM and FM bands.
3With the radio set to FM band, press Mode to toggle between FM stereo or mono mode. If the FM stereo mode is selected, the Stereo indicator on the LCD will be lit.
AUX IN mode
1Press Aux to select the auxiliary mode. The RCA jacks at the back of the stereo can be used for connecting external audio sources.
2Make sure the correct color of the RCA plug is paired with the correct color of RCA jack.
Reception
To adjust FM reception:
•Raise and extend the FM antenna, then adjust the position for the best reception. The Stereo indicator appears on the LCD only if an actual stereo broadcast station is being received.
To adjust AM reception:
•Because the
Tuning
To tune the stereo manually:
1In Tuner mode, press Skip Forward/Tuning + to move to a higher radio frequency one frequency step at a time.
2In Tuner mode, press Skip Backward/ Tuning - to move to a lower radio frequency one frequency step at a time.
To tune the stereo automatically:
1Press and hold Skip Forward/Tuning + or Skip Backward/Tuning - to auto search in the desired direction at the speed of four frequency steps per second.
2Hold the button down to bypass all stations until the button is released. After the button is released, the radio stops at the next station frequency. When the tuning reaches the band edge, the tuner will wrap around to the opposite end and keep searching.
3While
Channel save and recall
You can program (save) 20 preset FM stations and 12 preset AM stations.
To save station settings:
1In Tuner mode, select the station to be saved, then press Memory/Program once to enter the Channel Save mode.
2Press Memory/Program again to save the channel in memory, then press Preset + / – to confirm the operation.
3Repeat Steps 1 and 2 to enter more stations (up to 20 FM stations and 12 AM stations.)
4Press any other button to abort or exit the channel save operation.
To find saved stations:
1Press Preset + / – to find a saved channel.
2Press Preset + / – again to move to the next saved channel. Repeat the process as necessary to reach the channel you want.
Using the CD
This executive shelf system can play audio discs such as
6 |