Insignia
| Program mode | |
Use a CD with the logo at left in this | Program mode allows you to play up to 20 | |
stereo. The executive shelf system can | tracks in the order you choose. | |
play 3" (8 cm) single CDs without an |
| |
adapter (not included). Do not use a CD | To use the program mode: | |
single adapter for these CDs. | ||
1 In CD Stop mode, press Memory/Program | ||
| ||
| once to enter the Program mode. |
Note Always store discs in their cases. Do not expose discs to direct sunlight, high temperature, high humidity, or dust. When removing the disc from its case,
•Do not touch the recorded surface opposite the side of the CD with the label
•Do not stick paper on label surface
•Do not bend the CD.
Operating the CD player
When using the CD player, after pressing a button the LCD display will show the operation. Five seconds after any operation is completed, the LCD will
Basic CD play
1Press Push Open to open the CD compartment lid.
2Adjust the Volume +/- to minimum.
3Remove the CD from its storage case, then insert the CD with the label side facing up.
4Close the lid securely until you hear a click.
5Press Play/Pause to start playing.
Play/Pause function
This CD player has no ON/OFF switch.
To turn the player on and off:
1In power off mode, press Standby/On or Play/Pause once to turn on the executive shelf system in CD mode. The executive shelf system will start playback automatically.
2Turn off the CD player by pressing the Stop button.
3While in CD mode:
•Open and close the CD door to start playback automatically.
•When the CD stops, press Play/Pause once to start the CD playback.
•When the CD is playing, press Play/ Pause once to pause the CD playback.
Play mode
1In CD mode, press Mode to select play mode using the following sequence:
NORMAL → REPEAT 1 → REPEAT ALL →
RANDOM → REPEAT ALL RANDOM →
•Activating REPEAT 1 causes the REPEAT icon to flash.
•Activating REPEAT ALL turns on the REPEAT icon.
•Activating RANDOM turns on the RANDOM icon.
•Activating REPEAT ALL RANDOM turns on the RANDOM and REPEAT icons.
2To clear the play mode, press Stop or change to mode to Tuner.
3If Program mode is activated, random mode will not be activated.
2Press Skip Forward/Tuning + or Skip Backward/Tuning - to select the desired track.
3Press Memory/Program again to save the track in memory.
4Repeat Steps 2 and 3 to enter more tracks (up to 20 tracks).
5Press Play/Pause to start the program playback.
6Press Stop twice or open the CD door to clear program memories.
Search/Skip Forward and Backward
1Press Skip Forward/Tuning + or Skip Backward/Tuning - to skip the track forward
(+) or backward
2Press and hold Skip Forward/Tuning + or Skip Backward/Tuning - to search over more than one track forward (+) or backward
3Release the button to resume normal playback.
Maintaining the executive shelf system
Cleaning the player
•Wipe with a soft cloth. If the player is very dirty, dampen the cloth with a weak solution of neutral detergent and water, and then wipe clean.
Cleaning the lens
A dirty lens causes sound skipping, and if the lens is very dirty, the CD may not work at all.
To clean the lens:
1Open the CD cover.
2To remove dust or dry particles, use a camera lens blower/brush to blow on the lens several times.
•Wipe the lens lightly with the brush to remove dust.
•Blow on the lens one more time to make sure that all particles are gone.
3If the lens cannot be cleaned by using a brush/blower, use a dry cotton swab starting from the middle and working to the outside edge to remove dirt or marks.
7 |