Welcome
Connecting your amplifier
Setting up digital audio output
1Connect the optical and coaxial output jack to the amplifier.
2During disc play or after stopping, press Setup on the remote control to open the System setup page.
3Press the direction buttons to open the Audio setup page, then move the cursor to Digital Output.
4Select SPDIF/RAW or SPDIF/PCM, then press Enter to finish.
5Press Setup again to exit Setup.
Using your DVD executive shelf system
Getting started
Before turning on the system, make sure that all of the connections are correct and secure.
1Plug the power plugs into the power outlet, then press the Power button on the front panel to turn on the system. At this time, the system is in Standby mode, the Red Indicator light on the front panel is on, and the display shows the current time.
14www.insignia-products.com