Welcome

 

 

 

 

 

 

 

 

 

 

 

Problem

 

Cause and solution

 

 

 

 

 

 

 

The picture distorts or is out

• When playing discs that are severely scratched or

 

 

of sync

 

have interior defects, or when the system is

 

 

 

 

 

 

 

affected by strong outer electromagnetic fields, this

 

 

 

 

 

 

 

problem occurs and normal operation of this

 

 

 

 

 

 

 

system is affected.

 

 

 

 

 

 

 

• Turn off the power for a while and turn it on again.

 

 

 

 

 

 

 

• Use a non-defective disc, and the system resumes

 

 

 

 

 

 

 

working normally.

 

 

 

 

 

 

 

• Unusually defective discs may shorten the service

 

 

 

 

 

 

 

life of this system.

 

 

 

 

 

 

 

No sound

 

Cancel mute mode or turn up the volume.

 

Specifications

 

 

 

 

Disc type

DVD, CD, CD-R, and MP3

 

 

 

 

Video format

MPEG 2 for DVD, MPEG 1 for VCD

 

 

 

 

Audio format

MPEG 1, MPEG 2, PCM: STEREO

 

 

 

 

Signal output

Video system: NTSC, PAL, AUTO

 

 

 

 

 

Video output: 1.0 V p-p

 

 

 

 

 

Simulated audio output: 2 CH 1-2V

 

 

 

 

 

RMS: 10W×2 + 25W×1

 

 

 

 

Output joint

Component output, S-Video output, Video output, Stereo,

 

 

 

 

 

optical fiber, and coaxial digital audio output

 

 

 

 

Audio joint

Audio 1 and Audio 2

 

 

 

 

Power supply

AC 110 V ±10% 60 Hz

 

 

 

 

Maximum power

120 W

 

 

 

 

Frequency power

+/- 3 dB (20 Hz-20 KHz)

 

 

 

 

Operating condition

Temperature: 41-95°F (5-35°C)

 

 

 

 

 

Operating status: Level

 

 

 

 

Audio signal-to-noise

≥80 dB weight A

 

 

 

 

 

 

 

 

Note

These specifications are for reference only, and are subject to change without prior notice.

28www.insignia-products.com