Welcome
4To select Mono or Stereo while in FM mode, press the MO/ST button. When you select Stereo, the display shows a stereo signal. If the signal is not strong enough, you cannot select Stereo.
Note
Stereo is not available in AM mode.
5Press ENTER to exit FM/AM mode and enter disc play mode.
6Change the antenna direction to find the strongest signal for each station.
Troubleshooting
Note
In most cases, whether the DVD player can work correctly depends on the disc you are trying to play. Some features listed in the instruction manual may not work properly due to disc problems.
For your convenience, we have listed some methods to solve common problems you may encounter when using the system. If the problem occurs repeatedly, contact your nearest maintenance center.
| Problem | Cause and solution |
|
|
Cannot operate the system | • Check the batteries in the remote control to see if |
with the remote control | they need to be replaced. |
| • Use the remote control within 6 meters from the |
| system, and direct the remote control to the front |
| panel of the system. |
|
|
Cannot play discs | • Make sure that the disc is placed on the tray with |
| the label facing up. |
| • Play discs compatible with the DVD player. |
| • Switch off the player for a while and switch on |
| again. |
| • Parental control rating is set. Remove or change |
| the rating. |
|
|
No disc menu is displayed | Check if a menu is recorded. |
|
|
Play mode is different from | If the disc has no corresponding function codes, some |
what has been chosen in | features selected in the Setup menu may not work |
the Setup menu | properly. |
|
|
Picture distortion or no color | The TV system or video output of the system is not the |
displayed | same as the TV set. Reset the TV system. |
|
|
No picture is produced or | The setup of the video output does not match the way |
picture is produced | the system is connected with the TV set. Set up and |
asynchronously | configure correctly. |