Insignia NS-A2113 Mini-Shelf System

To use the cassette player:

1Press the POWER button to turn the shelf system on.

2Slide the function selector to TAPE.

3Open the cassette door by pressing the STOP/EJECT button at the bottom of the door.

4Insert a cassette tape, open side down, then press the door closed.

5Press the PLAY button to begin playback.

6Adjust the sound level with the VOLUME control.

7Press the DBBS button to boost the bass during playback (if desired).

8For private listening, plug your stereo headphones into the stereo headphone jack on top of the player. The speakers mute automatically.

Warning

To avoid damaging your hearing, set the volume to a low level before putting on the headphones, then adjust the volume up to a comfortable level.

9Press the STOP button to stop the cassette playback.

To record with the cassette player:

1Press the POWER button to turn the shelf system on.

2Slide the function selector to RADIO.

3Open the cassette door by pressing the STOP/EJECT button at the bottom of the door.

4Insert a blank cassette tape, open side down, then press the door closed.

5Tune the radio to the station you want to record, then press the RECORD button.

6Press the STOP button to stop recording.

Using your player to listen to another sound source

To use your player to listen to another sound source:

1Make sure that the power is turned off, then connect a cable from the audio out jacks on the device to the AUX-IN jacks on the back of the player.

2Press POWER to turn on the player, then slide the function switch to select AUX.

3Adjust the sound level with the VOLUME control.

www.insignia-products.com15