Blu-ray Disc Home Theater System

Connecting radio antennas

To connect an AM antenna wires:

1Flip the antenna wire covers down on the –AM ANT+ jacks on the back of your player.

2

3

1

 

 

2Insert the negative wire into the – jack.

3 Insert the positive wire into the + jack.

To connect antennas:

1Connect the AM antenna wires by following the preceding instructions, then turn on your player, tune to a radio station, and adjust the angle of the antenna if necessary.

AM antenna

FM antenna

- AM ANT +

FM ANT

Notes

•Writeable DVD discs (DVD-RAM, DVD-RW, DVD-R) must be finalized, VR-mode only.

•Your player supports discs that are compatible with DVD-RAM Standard Version 2.0.

•Playback may not work for some types of discs, or when specific operations, such as angle change and aspect ratio adjustment, are being performed. Information about the discs is written in detail on the box.

•Do not allow the disc to become dirty or scratched. Fingerprints, dirt, dust, scratches or deposits of cigarette smoke on the recording surface may make it impossible to use the disc for playback.

•CD-R/-RW, DVD-RAM/-RW/-R recorded with UDF or ISO9660 format can be played back.

•Windows Media Audio (WMA) files must be written to the disc with a .wma file extension in order to be recognized and played back correctly.

•JPEG picture files must be written to the disc with a .jpeg or .jpg file extension in order to be recognized and played back correctly.

Playing a Blu-ray Disc or DVD

To play a Blu-ray Disc or DVD: 1 Press STANDBY/ON.

2Turn on the TV, then select the input setting on the TV that matches the connection method you used to connect your player.

3Press OPEN/CLOSE to open the disc tray.

4Place a disc on the disc tray with the label facing up, then press OPEN/CLOSE to close the disc tray. It may take a few seconds for the disc to load.

5If a Blu-ray Disc or DVD menu opens, press

or to select PLAY, then press ENTER.

2Connect the FM antenna to the FM antenna jack on the back of your player, then turn on your player, tune to a raido station, then attach the antenna to a wall or pillar in a direction that provides the best reception.

Using your player

Note

Unless otherwise noted, all tasks in this section are based on using the remote control.

Playable discs

Disc type

Logo

Disc type

Logo

Blu-ray Disc

 

DVD-R

 

 

 

 

 

 

 

DVD-video

 

Audio CDs (CDDA)

 

 

 

 

 

(DVD-ROM)

 

 

 

 

 

 

 

 

 

DVD-RAM

 

MP3/WMA/

 

 

 

 

JPEG/Data CD

 

 

 

 

 

 

 

DVD-RW

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6To eject the disc, press OPEN/CLOSE.

Controlling Blu-ray Disc or DVD playback

Note

If appears on the screen, the current action is not permitted by the disc or your player. For example, many discs do not let you fast-forward through the warning information at the beginning of the disc.

To control Blu-ray Disc or DVD playback:

•To start or pause playback, press (play/pause). The sound is muted when your player is in pause mode. To resume normal playback, press

(play/pause).

•To stop playback, press (stop). The Setup menu is displayed. To resume playback, press or to select DVD/BD-ROM, then press ENTER. Depending on the disc, playback starts where it stopped or at the beginning of the disc. If you press (stop) twice, playback stops completely.

To start playback again, press (play/pause). Playback starts at the beginning of the disc.

•To fast-forward, press . Each time you press this button, the fast-forward speed changes in the following sequence: Fast x 2, Fast x 4, Fast x 8, Fast x 16, Fast x 32, Fast x 64, Fast x 128. Press

(play/pause) to resume normal playback.

www.insigniaproducts.com

7