Insignia NS-BT400

5Enter the default PIN of “0000.” Your computer and the speaker system are now connected through Bluetooth wireless technology.

6Select music on your computer to play wirelessly through your NS-BT400 speaker system.

To pair your speaker with a computer with a Bluetooth USB adapter:

1Plug the Bluetooth USB adapter into a USB port on your computer and install the Bluetooth software provided (if required).

2Start the Bluetooth application on your computer, then perform a search for Bluetooth devices in range.

3Turn on your speaker, then press and hold the PAIRING button for three seconds, until the Pairing LED flashes blue three times.

4Release the button. The Pairing LED alternately flashes blue and red for 90 seconds, indicating that the speaker and your computer are in pairing mode.

Note

If the pairing process cannot be completed within 90 seconds, the blue and red LED stops flashing and the Bluetooth function is terminated automatically. If this happens, you must initiate the pairing process again.

Your computer should now display a new device named “NS-BTS21” on the Bluetooth Device List.

5Select “NS-BTS21” from the Bluetooth Device List. You are prompted to enter a PIN.

6Enter the default passkey of “0000.” Your computer and speaker are now connected through Bluetooth wireless technology.

7Select music on your computer to play wirelessly through your speaker.

www.insignia-products.com9