Insignia
6To stop playback, press the STOP button.
7To repeat only the current track, press the REPEAT button once.
8To repeat all tracks on the CD, press the REPEAT button twice.
To program CD playback:
1Press STOP to stop CD playback.
2Press PROGRAM, press NEXT until the track you want appears on the LCD, then press PROGRAM again. The track is added to the playback program.
3Repeat Step 2 for each track you want to program. You can program up to 32 tracks.
4Press PLAY/PAUSE/CD to start playback of the tracks in the order that you programmed them.
5To clear the programmed tracks from memory, press STOP.
Attaching headphones
To attach headphones:
•Insert your headphone plug (headphones not included) into the headphone jack. The speakers automatically turn off while headphones are connected.
Installing batteries
To install batteries:
1Loosen the screw on the battery compartment door, then swing the door open.
2Insert four C batteries (not included). Make sure that they’re oriented according to the diagram inside the battery compartment.
3Close the battery compartment door, then tighten the screw.
Connecting external power
To connect external power:
1Make sure you are not in a wet or moist environment.
2Connect the power adapter’s DC power plug into the shower radio’s DC power jack. (power adapter not included)
3Plug the power adapter’s AC power plug into an AC power outlet.
Maintaining the radio and CDs
•Keep your CDs clean. Any dirt can scratch the CD surface, making playback less clear. Dirt on a CD can also damage the CD player mechanism. Wipe away any fingerprints or dust on the playing surface of a disc using a soft cloth.
•When you hold CDs, make sure you do not touch the playing surface.
•Do not place CDs near a heater or source of heat.
•If you do not use the shower radio for a long time, disconnect external power and remove the batteries.
4www.Insignia-Products.com