Insignia NS-CL02 CD Clock Radio

2Insert two (2) AAA batteries into the battery compartment. Make sure that you match the + and – symbols on the batteries with the + and – symbols in the battery compartment.

Insert batteries as shown

1.5V X 2

AAA/UM-4

3Reinstall and close the battery compartment and return your clock radio to the upright position.

Caution

Follow these precautions when using batteries in this device:

1.Use only the size and type of batteries specified.

2.Make sure that you follow the correct polarity as indicated in the battery compartment when installing batteries. Reversed batteries may cause damage to the clock radio.

3.Do not mix different types of batteries together (for example, alkaline, rechargeable, and carbon zinc), or semi-used batteries with fresh ones.

4.If your clock radio is not to be used for a long period of

time, remove the batteries to prevent damage or injury from possible battery leakage.

5.Do not try to recharge batteries not intended to be recharged, because they can overheat and rupture. (Follow battery manufacturer’s directions.)

6.Do not throw batteries into a fire. Dispose of used batteries as hazardous waste.

Note

The batteries are used to provide backup for your clock when AC power adapter is disconnected or there is a power failure.

When the battery indicator appears in the display, you need to replace the batteries.

Connecting the power cord

To prepare your clock radio for use:

1Make sure that your local AC power source matches the voltage shown on the plate located on the AC power adapter. If it does not, consult your dealer or service center.

12www.insignia-products.com