Insignia NS-CL02 CD Clock Radio

4Press SKIP +/FF/TUNE UP or SKIP–/FR/TUNE DOWN to set the minute. Make sure that you set the correct AM/PM setting.

5Press STOP/BAND/TIME SET again. The clock is set.

To set the alarm:

1Press and hold ALARM 1 or ALARM 2 (depending on the alarm mode you want) until the hour blinks.

2While the hour is blinking, press SKIP+/FF/TUNE UP or SKIP-/ FR/TUNE DOWN to set hour (AM/PM) you want to wake up.

3Press ALARM 1 or ALARM 2 again. The minutes begin to blink.

4While the minutes are blinking, press SKIP+/FF/TUNE UP or SKIP-/FR/TUNE DOWN to set the minute you want to wake up. Make sure that you set the correct AM/PM setting.

5Within 10 seconds, press SKIP+/FF/TUNE UP or SKIP-/FR/TUNE DOWN repeatedly to select CD, RADIO, or BUZZER as the alarm source. Make sure that the corresponding indicator appears on the display. If you select RADIO, the frequency of last setting will display on display

6Press ALARM 1 or ALARM 2 again to confirm the setting.

7To turn on the alarm, press ALARM 1 or ALARM 2 in standby mode.

8To cancel the alarm, press ALARM 1 or ALARM 2 until the alarm indicator disappears from the display. The alarm will not come on until it is reset.

Notes

In Standby mode, press ALARM 1 or ALARM 2 to activate the alarm. ALARM 1 (or ALARM 2) and BUZZER appear on the display. Press SKIP+/FF/TUNE UP or SKIP-/FR/ TUNE DOWN to cycle through the alarm options (BUZZER, CD, RADIO, or OFF).

The alarm automatically changes to BUZZER if the CD cannot play.

The alarm automatically switches off after 60 minutes if no key is pressed during the alarm set.

16www.insignia-products.com