8
NS-CLBT01-B/NS-CLBT01-W Digital Clock Radio with Bluetooth
www.insigniaproducts.com
2Insert two AAA batteries (not included) into the battery compartment.
Make sure that the + and – symbols on the batteries align with the +
and – symbols inside the compartment.
3Insert the tab on the battery compartment cover into the slot on the
battery compartment, then press the cover down until it clicks into
place.

Connecting the AC/DC power adapter

To connect the AC/DC power adapter:
1Plug the small connector on the power adapter into the DC IN jack on
the back of your radio.
2Plug the other connector on the power adapter into a power outlet.
Using your rad io

Setting the time

To set the time:
1Press Sleep for about two seconds until the hour digits blink on
the LCD.
2Press or to increase the hour or press or to decrease the
hour.
3Press Sleep again. The minutes digits blink on the LCD.
4Press or to increase the minutes or press or to decrease
the minutes.
5Press Sleep again to save the time setting and exit time setting
mode.
Note
If you unplug the AC/DC power adapter and the backup batteries
are dead or not installed, the time setting is lost.
Note
“AM” or “PM” appears on the LCD to the right of the time. When
you set the time, make sure that the “AM” or “PM” displays
correctly.