Insignia NS-CLW01 Setting up your weatherband clock radio, Supplying power, Plugging in your weatherband clock radio, Installing batteries, To install main power batteries:

Insignia NS-CLW01 Weatherband Clock Radio

Setting up your weatherband clock radio

Supplying power

Your weatherband clock radio can either be powered by plugging the radio into an AC power outlet or by installing four AA batteries (not included).

Plugging in your weatherband clock radio

To plug in your weatherband clock radio:

1Place your weatherband clock radio in a convenient place and find an AC power outlet within range of the power cord.

2Plug the power cord into the AC power outlet.

Caution

To protect your weatherband clock radio during thunderstorms, unplug the AC power cord from the AC power outlet.

Installing batteries

In addition to installing four main power batteries to operate your weatherband clock radio without AC power, you can also install a backup battery (included) to provide temporary power in case the AC power fails or the optional main batteries fail. The outside temperature transmitter also requires two AA batteries (not included) to operate.

To install main power batteries:

1Turn your weatherband clock radio around to the back, then open the door to the battery compartment.

2Insert four (4) AA batteries (not included) into the battery compartment. Make sure that you match the + and – symbols on the batteries with the + and – symbols in the battery compartment.