Insignia
3Plug the other end of the optional RCA cable into the A/V jacks on the TV or monitor. The white connector goes into the left audio jack. The red connector goes into the right audio jack. The yellow connector goes into the video jack.
Using your player
Note
Your player and most DVDs have region codes that help control illegal distribution of DVDs. The region code for your player is 1. You can only play DVDs with a region code of 1. The region code for a DVD is printed on the DVD or the DVD packaging.
To play a disc:1Make sure that your player is connected to power or that the battery is charged.
2Slide the OFF/ON switch on the front side of your player to the ON position.
3Slide the OPEN switch on the front of your player. The disc tray opens.
4Place a disc, label side up, in the disc tray, then press down on the area marked CLOSE to close the tray. The disc starts playing automatically.
5If necessary, rotate the VOLUME control to adjust the volume.
6If necessary, rotate the BRIGHTNESS control to adjust the brightness for a DVD.
7To stop playback, press 
.
Controlling DVD or audio CD playback
To control disc playback:•Press 
once to stop playback. Your player remembers where
you stopped. If you press 
, your player starts playing at the point where you stopped.
•Press 
twice to stop playback. If you press 
, your player starts playing at the beginning of the disc.
•Press 
to pause playback. Press this button again to resume playback.
•Press 
to