Insignia NS-DCC5HB09 5 MP High Definition Digital Camcorder with 3.0" LCD Monitor

Selecting the flash setting for pictures

Your camcorder has four flash settings. The flash setting icon appears on the LCD.

Auto-flash—The flash fires

A automatically depending on the light conditions. Use this mode for general photography.

On—The flash fires for every picture.

Off—Use this mode when flash photography is prohibited or when the subject is beyond the range of the flash. When you turn off the flash, no flash icon appears on the LCD.

Red-eye reduction—The flash fires twice right before you take the picture. Use this mode to help eliminate red reflection in eyes.

To select the flash setting for pictures:

1Press (Record/Play) to switch to record mode.

2Press OK. The record menu opens.

3Press or to select Camera Mode.

4Press T (up) or W (down) to select Flash, then press OK.

5Press T (up) or W (down) to select a flash option, then press OK to save your selection and close the menu.

Note

 

You can also press

to change the flash setting.

Note

The flash is disabled when the battery power is

low .

Using the self-timer for pictures

When the self-timer is turned on, your camcorder waits 10 seconds after you press (Picture Shutter) before it takes the picture.

To use the self-timer for pictures:

1Press (Record/Play) to switch to record mode.

2Press OK. The record menu opens.

3Press or to select Camera Mode.

4Press T (up) or W (down) to select Selftimer, then press OK.

5Press T (up) or W (down) to select On or Off, then press OK to save your selection and close the menu.

Taking a sequence of pictures

When the Multi-snap option is turned on, your camcorder takes five pictures in rapid sequence.

To take a sequence of pictures:

1Press (Record/Play) to switch to record mode.

2Press OK. The record menu opens.

3Press or to select Camera Mode.

www.insignia-products.com

17