Insignia NS-DPF8/NS-DPF10 Digital Picture Frame

2

then click Copy.

Maintaining your digital

Select the files you want to copy, click File,

 

3

Click in the window for the removable card,

picture frame

 

click File, then click Paste.

 

Note

If your PC is connected to Local Area Network drives, or if you have multiple drive letters already assigned to peripheral devices, you need to manage your drive settings in Windows to free up the four drive letters immediately following your CD-ROM drive so the Digital Photo Frame can assign them to memory card slots.

Disconnecting the digital picture frame from a Windows computer

It is important not to just unplug the digital picture frame when you are done transferring files. It can seriously damage the built-in memory.

To disconnect from a Windows computer:

1Right-click the USB icon in the task tray, then click Safely Remove Hardware. A dialog box opens.

2Click USB Mass Storage Device, then click Stop. Another dialog box opens.

3Click OK. Another dialog box opens.

4Click Close. When the message It is Now Safe to Disconnect Hardware appears, you can disconnect the USB cable from your computer.

Connecting to a Macintosh computer

You can copy files from your Macintosh computer to your digital picture frame.

To connect to a Macintosh computer:

1Plug in and turn on the digital picture frame.

2Connect the small end of the USB cable to the USB port on the side of the digital picture frame.

3Connect the larger end of the USB cable to a USB port on your Macintosh computer. The Macintosh will recognize the digital picture frame as an external storage device.

4Drag and drop files between the two devices as you normally move photo files.

Disconnecting the digital picture frame from a Macintosh computer

To safely disconnect the digital picture frame from your Macintosh:

1Select the digital picture frame's icon on your desktop, then press Command-eto eject the disk.

2When the icon is no longer on the desktop, unplug the USB cable.

Connect a USB flash drive

Cleaning the LCD Screen

Treat the screen gently. The screen is made of glass and can be scratched or broken.

To clean fingerprints or dust from the LCD screen, we recommend using the cloth provided or a soft, non-abrasive cloth such as a camera lens cloth.

If you use a commercial LCD cleaning kit, do not apply the cleaning liquid directly to the LCD screen. Clean the LCD screen with the cleaning cloth moistened with the liquid.

Cleaning the digital picture frame

Clean the outer surface of the digital picture frame (excluding the screen) with a soft cloth dampened with water.

Troubleshooting

Problem

Solution

 

 

The digital picture frame

The adapter is not securely connected

won't turn on.

to the picture frame or the power

 

switch is not on.

 

 

A memory card is

• Make sure that the memory card

inserted in the digital

is one of the supported formats

picture frame but you

and that the files on the card are

can’t view your photos.

JPEG images files.

 

• Turn the digital picture frame off

 

and make sure that the memory

 

card is inserted all the way into

 

the card slot and is inserted

 

correctly.

 

• Turn the frame on. After a couple

 

of seconds, you should see your

 

first photo. Press EXIT to open

 

the Select Card screen. Select the

 

card, then select Photos. You

 

should see the Thumbnails

 

screen listing all photos on the

 

card. If you don't, you may want

 

to try another card.

 

Note: Some digital cameras save

 

images in formats other than JPEG.

 

Refer to your camera's manual if your

 

photos are not JPEG files.

 

 

The picture displays some

Higher resolution pictures load more

pictures slower and some

slowly. Try using lower resolution

pictures faster

pictures or down sampling your

 

images. See your camera's operating

 

manual for details on down sampling

 

your photos.

 

 

Your digital picture frame uses a USB flash drive the same way it uses memory cards.

www.insignia-products.com

9